Wondering where renewables can plug into the grid? Check out Xcel Energy's hosting capacity analysis

Share:


Translate:
Subscribe to digest
Region: 
Map of Xcel Energy’s hosting capacity analysis

This blog is being re-posted with permission from the original by Laura Hannah at Fresh Energy.

It’s here! The highly anticipated second iteration of Xcel Energy’s hosting capacity analysis has been published. The tool provides public transparency into the results of 1,047 feeder models analyzing the ability of the grid to host distributed energy resources (like a community solar garden) without adversely impacting power quality or reliability. This user-friendly tool tells us where new energy systems can be connect to the grid most efficiently.

A (much) better mouse trap: This year’s version is accompanied by a map! The image at the top of the post is a snapshot of Xcel’s twin cities service territory. The colors range from the dark green areas which have a hosting capacity value of over one megawatt (>1MW) to the red areas which have a hosting capacity value of zero. It’s pretty simple: green very generally means a project should be good to go and red means a project may not be feasible without major upgrades.

The image below is zoomed in to an area in Baytown Township. The level of detail is impressive! As you can see, the colors generally follow the feeder lines where a distributed energy resource would electrically connect to the grid. With access to this information, a project developer can site a project where interconnection is most likely to be quick, easy and inexpensive.

In addition to the map, the analysis includes a spreadsheet of data with a row for each substation and feeder that provides the minimum and maximum hosting capacity value at each location as well as the limiting factor for each (e.g. primary overvoltage, breaker reduction limit of reach, etc.). A developer with power systems engineering chops may be able to use the specific limiting factor information to estimate the interconnection costs required to connect at that given site. But they would need to apply for interconnection and advance through Xcel’s full study process in order for Xcel and the developer to understand the full scope.

How the sausage gets made: Xcel also improved upon their methodology over the 2016 version in a few key ways. This version now includes the distributed energy resources that are operating today (not including standby generators), contemplates some advanced inverter functionalities, and tweaked the methodology to more accurately consider large projects such as solar gardens which are most likely to benefit from the tool.

Click here to read the full blog post >>
 


Get Answers blog series The Get Answers series on the Energy Stories Blog offers useful tips from CERTs and our partners to help you get to the bottom of your energy efficiency and renewable energy questions. Click here to see more stories in the series >>

Relates to the following technologies

 

May be of interest to the following communities

 
See comments and add your ownJoin the conversation:
See comments and add your own >>
Share:


 
 
MN Energy Stories Blog
Bringing you news about clean energy projects and opportunities happening across the state. Tell your story.


Stay in the Loop:
Receive a weekly email digest
of MN Energy Stories

Subscribe to RSS
Subscribe via RSS


Minnesotans building a clean energy future

         

    CERTs Partners:

Minnesota Department of Commerce University of Minnesota Regional Sustainable Development Partnerships and Extension Great Plains Institute Southwest Regional Development Commission